|Payment & Shipping Terms||Supply Capacity|
|Unit Price:||1.0 USD||Production Capacity:||123456|
|Trade Term:||FOB,EXW||Packing:||New carton packaging|
|Payment Terms:||T/T||Delivery Date:||2-3 days|
|Min. Order:||1 Piece/Pieces|
|Means of Transport:||Ocean, Air, Land|
IS200VSVOH1BDC | GE | Mark VI CARD
E-mail: sales*mvme.cn (please change * to @)
The IC698CHS017 is a 17-slot, front and rear mounted rack capable of supporting Series 90-70, VME, and RX7i modules. The module connectors on the rack backplane are spaced 0.8 inches (20.3 mm) apart and are compatible with both single width and double width modules. Rack slot zero holds the unit's power supply, and rack slot one holds the unit's CPU. All other slots are available for any mixture of modules.
The IC698CHS017 is considered an "open equipment" rack; therefore, it must be installed in at least an IP54 protection encasement. This rack is 11.15 inches tall (283 mm), 19 inches wide (483 mm), and 7.5 inches deep (190 mm). Nine inches (23 cm) of space is required to install a fan between racks. Note: A cooling fan is required if certain modules are installed in the rack, and each fan is designed for a different power source.
Jumpers and DIP switches are not needed for addressing modules; instead, the rack supports slot sensing for I/O modules. Input/output module point referencing is accomplished via CIMPLICITY Machine Edition Logic Developer-PLC software. Interrupt acknowledge signals as well as bus grant signals are automatically connected together in a daisy chain configuration. RX7i AC power supplies are supported by theIC698CHS017 with the ability to sustain even higher currents. J2 connectors on the rack backplane support 64 bits per cycle VME transfer speeds.
|GE Fanuc||0285A7595 MGM115|
|GE Fanuc||0285A7100 ISM101|
|GE Fanuc||0285A6763 AFM101|
|GE Fanuc||0285A8150/ AFM201|
|GE Fanuc||0285A7104/ ETM101|
|GE Fanuc||0285A8145 AFM102|
|GE Fanuc||0285A7159 ETM102|
|GE Fanuc||0285A6764/ VMM101|
|GE Fanuc||0285A7102/ ABM101|
|GE Fanuc||0285A6778 IOM202|
|GE Fanuc||0285A7109 PSM201|
|GE Fanuc||0285A6777 IOM101|
|GE Fanuc||0285A6778/ IOM203|
|GE Fanuc||0285A6772/ ULM101|
|GE Fanuc||0285A6776 ULM111|
|GE Fanuc||0285A6773 ULM121|
|GE Fanuc||0285A6774/ ULM131|
|GE Fanuc||0285A6775 ULM141|
Are you looking for a suitable sustainable partner to ensure your industrial electronics run smoothly or in the event of a failure?
If so, then Moore Automation is your best choice.
Category: GE-General Electric PLC module