MVI56-DFCMR Interface Module with Reduced Data Block

ProSoft  MVI56-DFCMR !!! 

Contact:Jessica

Email:sales*mvme.cn (please change * to @)

Phone:+8618030235311

Skype:jessica01235483

Wechat:hu18030235311

Successful application of this module requires a reasonable working knowledge of the Rockwell Automation ControlLogix hardware, the MVI56-DFCMR Module and the application in which the combination is to be used. For this reason, it is important that those responsible for implementation satisfy themselves that the combination will meet the needs of the application without exposing personnel or equipment to unsafe or inappropriate working conditions. 

The MVI56-DFCMR module requires the following minimum hardware and software components: 

• ƒ Rockwell Automation ControlLogix™ processor, with compatible power supply and one free slot in the rack, for the MVI56-DFCMR module. The module requires 800mA of available power.

•  ƒRockwell Automation RSLogix 5000 programming software version 2.51 or higher. ƒ 

•  Rockwell Automation RSLinx communication software ƒ 

•  Pentium® II 450 MHz minimum. Pentium III 733 MHz (or better) recommended ƒ 

•  Supported operating systems: 

•  Microsoft Windows XP Professional with Service Pack 1 or 2  

•  Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3 

•  Microsoft Windows Server 2003 ƒ 

•  128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended ƒ 

•  100 Mbytes of free hard disk space (or more based on application requirements) 

• ƒ 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color 1024 × 768 recommended) ƒ 

•  CD-ROM drive ƒ 

•  ProSoft Configuration Builder, HyperTerminal or other terminal emulator program. 










Prosoft  MVI56-DFCMR

Prosoft  MVI56DFCMR                                                                                      







In order for the MVI56-DFCMR module to function, a minimum amount of configuration data must be transferred to the module. The following table provides an overview of the different types of configuration data that the module will require, depending on the operating modes to be supported. 









More details please contact us !!!




MVI69-PDPMV1		PROFIBUS DPV1 Master Communication Module
MVI69-PDPS		PROFIBUS DP Slave Communication ModulePS69-DPM PROFIBUS DPV1 Master
MVI56-ADM		Programmable Application Development Module - 2 Serial Ports
MVI56-ADMNET		C Programmable Application Development Module - 1 Ethernet & 2 Serial Ports
MVI56-MNET		Modbus TCP/IP Communication Module
MVI56-MNETC		Modbus TCP/IP Communication Module - Client Only
MVI56-MNETCR		Modbus TCP/IP Communication Module in Remote Chassis - Client Only
MVI56-MNETR		Modbus TCP/IP Communication Module Remote Chassis
MVI56-HART		HART Multi-drop Communication Module - 4 Channel




Our company has many products in stock, which are immediately available.